NC shearing machine is a machine that cuts metal sheets into blocks of different specifications according to production needs. The shearing machine has upper and lower blades. Generally, the lower blade is installed on the workbench, and the upper blade reciprocates to cut the NC shearing machine. The large thickness and width of the blank that can be cut by a particular shearing machine and the limit value of the strength of the blank are limited, and the machine may be destroyed if used beyond the limit. The cutting edge of the shearing machine is very sharp, the shearing machine is dangerous and the fingers operated in the work are very close to the cutting edge, so improper operation will cause serious accidents such as cutting fingers.

7 protection methods for shearing machine.

1. Before work, carefully check whether all parts of the shearing machine are normal, whether the electrical equipment is intact, whether the safety protection device is reliable, and whether the lubrication system is unblocked NC shearing machine, and then add lubricating oil, test the machine, and test it before using it. When two or more than two people are working together, one person must be determined to command in a unified manner. The machine tool can only be cut when the 7 protection methods check the table and the surrounding obstacles.

2. The shearing machine is not allowed to cut two different specifications and different materials at the same time NC shearing machine. It is forbidden to cut without material. The surface of the cut sheet must be flat. It is not allowed to cut the narrow sheet that cannot be compressed NC shearing machines.

3. When operating the shearing machine, you must concentrate, your fingers should be 200mm away from the knife-edge when feeding, and leave the pressing device NC shearing machine. Feeding and reclaiming should prevent the steel plate from scratching, and prevent the cut steel plate from hurting people. The footswitch should be equipped with a sturdy protective cover to prevent heavy objects from falling on the footswitch or stepping on it by mistake. It is not allowed to refuel or adjust the machine tool while driving the NC shearing machine.

4. All kinds of shearing machines should properly adjust the knife-edge gap according to the specified shearing thickness to prevent accidents caused by improper use of the NC shearing machine.

5. The brake of the shearing machine should be checked frequently to ensure reliability and prevent the brake from loosening.

6. The edges of the sheet and the cut strip are sharp, sometimes with burrs, so they should be prevented from being scratched.

7. In the operation process, use safe hand tools to complete the operations of feeding, positioning, picking up and cleaning leftovers, etc., which can prevent fingers from being injured by the mold.